With RDA devices, you have to build a coil and inhale the vapor directly from it instead of inhaling the vapor directly. When using these coils, they should be dosed with e-liquid to ensure that they work properly so you know your device is heating and working as intended.
Vape coils are one of those devices that give you a feeling that is much more like smoking cigarettes without the smoke. They are often the perfect choice for smokers that want to quit or those that want to try an alternative to smoking cigarettes.

1. What are vape coils?

A vape coil is simply a piece of wire wrapped around a wicking material which is most commonly organic cotton. The wire wraps are usually spaced out with little pieces of silica wick (glass) to ensure the coils heat up evenly. Vape coils are usually found inside vaporizers or e-cigarettes but there have been a few cases of advanced vapers making coils for a mod like atomizers and drippers.

2. How does a vape coil work?

Vape coils are very similar to a regular atomizer coil, the wire is heated up by the battery and begins to vaporize your e-liquid. This creates a little hotspot where all the delicious flavor is produced. As the coils heat up, the coil acts as a magnet. These coils also produce more clouds when you inhale, so it is recommended to get coils that are stronger than average and have a larger gauge of wire in them. The sizing of these coils is usually based on the type of vaporizer you use they can be used for almost every type of atomizer.

The sizes range from 0.7mm to 2mm with some accommodating 5 and 6 millimeters as well.

These coils are typically placed inside of the vaporizers as they contain materials such as cotton. The material is usually replaceable and wrapped around some type of mount design allowing for the manufacturers to install them right into their coils.

3. What are the different types of vape coils?

Imaeg source: unsplash.com

There are many different combinations of different metals that can be used to wrap vape coils, and each one produces its own unique flavor from your juice. Most coils are made out of Kanthal, Nichrome, NiFe, or Nichrome Titanium but others are made outVape Coils and how they work

4. Why are there different types of coil wire?

The most common way that vape coils are made is by using Kanthal wire. This type of wire has a resistance of about 0.2 ohms (dual coil systems have a higher resistance). The second most common type of wire for coils is NiFe, this wire has a resistance of about 0.45 ohms. NiFe (Nickel-Iron) has magnetic resistance. Because of this, these types of coils are usually used for the sub-ohm systems. The reason for the different wire resistances is that you want to regulate your heat source and keep it from burning your cotton and producing a nasty burnt taste in your juice.

5. When should you change a vape coil?

Image source; shopify.com

When your vaporizer or e-cigarette is in use, the resistance of the vape coil will quickly change for a number of reasons. Your vape coils’ resistance changes for many reasons. One reason is that when your vaporizer or mod battery is drained, less power will be sent to the coil so it will have to work harder and heat up more. This adds resistance to your coil and makes it harder for your e-liquid to get heated up. It’s always best to change your coil when it is less than half-full of e-liquid, that way you can get the most out of your juice. You will want to change your coils when they are fully used up as opposed to fully charged.

Most people look for that burnt taste that is usually associated with a burnt coil. Perhaps when you change your coil you will notice that there is some blackening around the edges. You will notice a change in flavor and vapor production. When this happens, it is definitely time to change your vape coil! There are many vape coils out there that are made with different materials including stainless steel, titanium, and nickel. When it comes to e-liquids, there are different flavors, from fruits (i.e. pineapple) to candy (i.e. gummy bear).

6. How Does the Atomizer Work When You Vape?

The word “atomizer” has been tossed around and abused so often that even experts are not so sure of its true meaning.
One thing is certain: an atomizer is a device that generates steam, while a vapor coil is an element that heats the inside. One of the easiest to use sub-ohm steam tanks is made for evaporation, so steamers can enjoy massive steam production and perform the “vape trick.” The steam drips into the tank and the coil heats it up with the heat of the evaporator.

With a new vapor tank, the only difference between an atomizer and a sub-ohm vapor coil with a vaporizer is the need to build a separate coil.

7. RDA or RTA?

Image source: medicalxpress.com

This is a kind of a cross between RDA and RTA and can be screwed onto the tank or used in conjunction with a normal coil, such as an evaporator, evaporator, or even an evaporator. The third category of RBA is known as rebuildable drip atomizers (RDTAs), and there are many different types of them.
With RBA you can’t install your own self-made coil says 180smoke.ca, but you don’t have to be a master coil builder overnight. Instead, simply insert a prefabricated coil head that fits easily on your atomizer. It’s great to know that I can get a satisfying vape out of a disposable coil head, and I’m happy to make a super-advanced vape coil for you, even if it’s not what everyone is asking for.

8. How do you build vape coils?

If you know exactly what materials you want for your coil, then building a wickless e-cigarette coil should be easier than any other. These coils are usually done by hand and are normally made on a device called an ohm reader. The ohm reader is used to check the resistance of the coil, but it can also be used to make the coil. An ohm reader can cost up to $100 so it’s much better to just buy a vaping starter kit that includes all the necessary components you need.

If you want more of a DIY project, then building your own vape coils would be a fun project to try. It can be very rewarding to know that you made your own coils and that they are working exactly the way you want them to. If you’re considering doing this, make sure that you have a lot of time on your hands because it might take a while, depending on how much experience you have with coils

Advanced users can experiment with different wattages and resistor coils to change the way their vapor works, but most users should follow the manufacturer’s recommendation for the coil.
If you use your evaporator daily, you will probably want to change your coil every few weeks, but if your e-juice does not taste good or produces unusually small clouds, it might be time to change coils. When a coil starts to fail, the first thing that goes off is usually the cloud production of your vapor, followed by the taste of the juice.

LEAVE A REPLY

Please enter your comment!
Please enter your name here